Instrumentation System Design of BIOPARKS Biometric Parking System Using Wemos D1R1 Microcontroller

Main Article Content

Siti Robiah Adawiah
Rahmat Hidayat
Rahmat Hidayat
Ulinnuha Latifa

Abstract

Parking lots are a public means of storing vehicles but the high crime rate of vehicle theft makes vehicle owners feel insecure when leaving their vehicles while doing activities outside the home. To solve this problem, a systematic parking security system using a biometric system was created. The biometric system is a security system that can identify a person's characteristics by using Wemos as a microcontroller to process the input from the sensor then produce output to the actuator and send data to the BYLNK application. This research was conducted to design an instrumentation system so that the system implemented can work properly. The final results obtained are the characteristics of each sensor and actuator used, including a fingerprint sensor with an error value of 0.8%, an ultrasonic sensor with a sensitivity value of 1.1156 cm with an accuracy value of 99.83%, an error value of 0, 16% and servo motors with an error value of 0.15%.

Downloads

Download data is not yet available.

Article Details

How to Cite
Adawiah, S., Hidayat, R., Hidayat, R., & Latifa, U. (2021). Instrumentation System Design of BIOPARKS Biometric Parking System Using Wemos D1R1 Microcontroller. Electro Luceat, 7(1), 23-30. https://doi.org/10.32531/jelekn.v7i1.324
Section
Articles

References

[1] F. Triyanto, “Aplikasi Pengenalan Individu Berbasis Sidik Jari Pada Pintu Gerbang Untuk Pengamanan Kendaraan,” Brawijaya, 2016.
[2] Muhammad Rizki Utomo, “Perancangan dan Implementasi Sistem Keamanan Parkir Dengan Fingerprint Pada Parkiran Telkom University,” Proceeding Eng., vol. 6, no. 1, pp. 980–987, 2019.
[3] S. L. Padula and R. K. Kincaid, “Optimization Strategies for Sensor and Actuator Placement,” Contractor, vol. 23681, no. April, pp. 1–12, 1999, [Online]. Available: http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.30.99&rep=rep1&type=pdf.
[4] B. Arsada, “Aplikasi Sensor Ultrasonik Untuk Deteksi Posisi Jarak Pada Ruang Menggunakan Arduino Uno,” J. Tek. Elektro, vol. 6, no. 2, pp. 1–8, 2017.
[5] J. Kustija, “Modul Sensor Dan Tranduser,” Modul Sens. dan Transduser, 2012.
[6] H. Pratama, E. Haritman, and T. Gunawan, “Akuisisi Data Kinerja Sensor Ultrasonik Berbasis Sistem Komunikasi Serial Menggunakan Mikrokontroler Atmega 32,” Electrans, vol. 11, no. 2, pp. 36–43, 2012.
[7] A. B. P. Kakiay, D. B. Santoso, and U. Latifa, “Sistem Instrumentasi Pada Pendeteksian Tangan dan Monitoring Tangki Persediaan Alat Cuci Tangan Otomatis Menggunakan Photovoltaic,” Electro Luceat, vol. 6, no. 2, pp. 117–123, 2020, doi: 10.32531/jelekn.v6i2.223.
[8] H. Isyanto, W. Ibrahim, and M. A. Hidayatulloh, “Desain Kunci Pintu Fingerprint Pada Ruangan Khusus ( Restricted Area ) Dengan Deteksi Kesalahannya Menggunakan Kamera,” Semin. Nas. Sains dan Teknol., pp. 1–7, 2019.
[9] M. E. Wolak, D. J. Fairbairn, and Y. R. Paulsen, “Guidelines for estimating repeatability,” Methods Ecol. Evol., vol. 3, no. 1, pp. 129–137, 2012, doi: 10.1111/j.2041-210X.2011.00125.x.
[10] D. Nur et al., “PERANCANGAN DAN REALISASI BIOMETRIC FINGERPRINT ATTENDANCE DAN WEB MONITORING SYSTEM Design And Realization Of Biometric Fingerprint Attendance And Web Monitoring System,” vol. 6, no. 2, pp. 2375–2406, 2020.
Abstract viewed = 12 times
PDF downloaded = 16 times